供应中频感应电炉，中频炉，中频感应炉

用途：主要用于金属材料整体在锻造、挤压、热轧和剪切前的加热以及金属材料整体的调质、退火、回火等热处理。
Usefulness：lt can mainly be used to heat integral body of metal materials before being forged extruded, hot-mil-led or cut . lt can also be applied in heat treatmeat for integral bodies of metal materials , such as hardening ＆ tempering, annealing, tempring and etc.
特点：Features
加热速度快，氧化脱碳少
Heating speed is higher and oxidativede-carbonizat-ion volume is less
由于中频感应加热的原理为电磁感应，其热量是由工件自身产生，所以该加热方式升温速度快，氧化较少加热**，工艺重复性好。
Since heating principle of IF inductive heating is electromagnetic induc-tion and its heat is created by itself, its temperature-rising speed is higher; its oxidative volume is less but heating efficiency is higher. Moreover,its repeatability of technology is more perfect.
自动化程度高，可实现全自动无人操作：
Lts automation degree is higher and full-automatic unattended operation can be fulfilled：
选用自动上料和自动出料分检装置，再配上我公司自行开发的**控制软件，可实现全自动无人操作。
Automatic feeding and antomatic discharge separation ＆ selection device are selected, besides which special contr-ol software developed by our company is also added , so that full-automatic unattended operation can be fulfilled.
加热均匀，温度控制精度高：
Lts heating is homogeneous and temperature control precision is high：
加热均匀，**加热芯表温度小。通过温度控制系统可对温度进行**控制。
Lts heating is so homogeneous that heating temperature difference is smaller between surface surface and kernel of the mat-erials. Precision control can be lmplemented for temperature through its temperature control system
感应炉体的更换简便
Replacement of the inductive furnace body is simple.
根据加工工件尺寸的不同，须配置不同规格的感应炉体。各炉体均设计有水电快换接头，使炉体更换简便、快捷、方便。
Different sizes of inductive furnace bodies should be configured according to difference between processing dimensions. All furnace bodies have been designed with quick-detached water-electric connectors, so that it is simpler ,quicker an-d more convenient in replacing furnace bodies.
设备保护齐全
Protection functions the device are well provided
全套设备设有水温、水压、过流、过压、缺相等保护，并设有温度上、下限报警装置。使设备在故障时**保护，不损坏元器件。
The whole device is equipped with all kinds of protection functions, such as water temperature , water pressure , o-ver-current, over-voltage, phaseloss and atc. Lt is alsobe designed with temperature limit alarm devices, so th-at the device can be reliably protected in case of errors and its elements cannot be damaged.
能耗低、无污染
Lt features in low energy consumption and no pollution
加热**，与其他加热方式相比，有效的降低了能耗。设备符合环保要求、无污染。在锻造行业，加热至1250℃时的能耗小于390kwh/t
Lts heating efficiency is so high that, compared with other heating methods, energy consumption can be lowered ef-fectively. The device is in accordance with requirements of environment protection and no pollution . in forging industry , its energy consumption is lower than 390kwh/t when being heated up to 1250℃.
备组成及选配形式
Equipment Composition and Configuration Selection Mode
设备组成
Equipment Composition
透热设备一般有中频电源、电热电容、感应炉体、气动或电动推料等部分组成。全自动设备还包括自动上料排序装置、平振送料或链条送料装置、压辊进料装置、温度自动控制系统。
Diathermy equipment is ordinarily made